Stainless steel bottom emulsifier
Contact Info
- No.4285 Shendu Highway, Pujiang Town, 200000
- 胡工
- 18001633556
- 15000845544@163.com
Stainless Steel Bottom-Entry Emulsifier
Product Introduction:
The stainless steel bottom-entry emulsifier is a high-performance dispersing and emulsifying machine designed for entry into containers from the bottom. It is used for mixing, emulsifying, and dispersing free-flowing or viscous liquid media in batch operations. Operating on the rotor-stator principle, the ECA is suitable for applications that cannot be completed using traditional stirring methods.
Product Features:
It is a high-shear dispersing and emulsifying machine designed for installation at the bottom of containers, suitable for special environments or hygiene requirements. After processing, materials can be discharged or circulated directly; with traditional bottom-mounted installations, materials cannot be discharged separately after processing. The ECA can provide two different circulation modes: internal and external.
The ECA machine can avoid strong vortexes and aeration, even when the tank has a very low filling level or is emptied during stirring or dispersion.
The ECA machine features a simple and sturdy design. It consists of a three-phase motor, a rotor drive shaft, and a flange, with a rotor integrated with a protective cover to form a compact unit. The standard version of the ECA is suitable for processing materials at temperatures up to 120 °C. The shaft seal uses a low-maintenance mechanical seal.
Product Parameters:
Model | Size | Processing Capacity | Motor Power @50Hz | Standard Speed @60Hz | Linear Speed @60Hz |
Liter (L) | KW | rpm | m/s | ||
ECA 60 | 60 | 2000 | 2.2 | 3600 | 27 |
ECA 115 | 115 | 5000 | 5.5 | 3600 | 18 |
ECA 150 | 150 | 8000 | 7.5 | 3600 | 25 |
ECA 220 | 220 | 10000 | 11 | 1800 | 18 |
ECA 250 | 250 | 16000 | 15 | 1800 | 21 |
ECA 280 | 280 | 22000 | 22 | 1800 | 24 |
ECA 300 | 300 | 30000 | 30 | 1800 | 25 |
1. The upper limit batch processing volume in the table is measured with water as the test medium;
2. The batch processing volume depends on the viscosity and solid content of the material. If you encounter difficulties in model selection, please contact Yuedi Company for consultation;
3. For special requirements such as high temperature, flammability, explosiveness, and corrosion, please confirm in writing before customization to avoid dangers and losses;
4. It is installed from the bottom of the container, and there is no requirement for verticality relative to the horizontal during installation;
5. The data in this table may be inconsistent due to technical improvements or customization; the actual product shall prevail.
Product Applications:
It is mainly suitable for equipment with small containers, where upper installation is not possible, or for equipment requiring multiple emulsifier pumps or small initial feeding. It can also meet special working conditions such as vacuum and pressure requirements.
· The bottom-mounted dispersing emulsifier pump uses high-quality motors and materials, operates with lower noise and more stability, ensuring the high quality of the whole machine
· It causes no contamination to materials, making it an ideal choice for industries with high cleanliness requirements such as pharmaceuticals, food, and cosmetics;
· It has a simple and reasonable structure, is easy to clean and disassemble, and meets GMP hygiene requirements;
· It is suitable for atmospheric pressure, closed, vacuum, and pressure working conditions;
· The bottom-mounted dispersing emulsifier pump can be equipped with mechanical seals: single-end, double-end
· Applicable temperature of the bottom-mounted dispersing emulsifier pump: ≤160℃
| Machinery & Equipment/General Mechanical Parts/Mixers & Blenders | |
